Delta moped: technical specifications, photos, videos, reviews

This term has other meanings, see Riga.

"Riga"

- a brand of Soviet mopeds and mokiks produced by Riga Moto (translated from Latvian as “Red Star”) from 1958 to 1998.

On the screensaver - "Riga-1" - the first mass-produced two-speed moped in the USSR.

Technical characteristics of the Delta moped

The moped gained great popularity in small towns and villages, because in addition to accessibility, it provided excellent maneuverability and maneuverability. Also, the design of the moped made it possible not only to place additional cargo, but also with the additional space on the seat it was possible to carry one passenger. By the way, the official characteristics of the Delta moped state that the maximum load capacity should not exceed 120 kg. It was this convenient and simple design, as well as the small-capacity engine, that provided the moped with a large influx of customers among young people and older people.

Despite the low price, the moped has an excellent engine, which is praised by many users. The moped is propelled by a 4-stroke engine with one cylinder and air cooling. The engine capacity is 50 cm3, and the power is 5 hp. These motor characteristics are similar to simple scooters or older mopeds, such as the Karpaty moped. But this only proves the ease of assembly, and therefore the reliability of this device. The simple engine is not covered with any additional protection or plastic, so repairing the Delta moped will be simple and even a beginner can figure it out.

With a light weight of only 60 kg, this device is capable of reaching speeds of up to 60 km/h, but with a passenger it will be reduced to somewhere around 50 km/h. New mopeds have the ability to start with either an electric starter or a kick starter. If you have been using such a moped for a long time, then most likely your electric starter will be faulty, because their system often fails. With such a moped, everything is in plain sight; unlike scooters, this model has a minimal body. In the middle is the fuel tank, which has a volume of 4 liters. There is also a small trunk above the tank for storing things.

Delta moped engine

The suspension of the Delta moped is very simple, and at the same time convenient for any road, be it a country dirt road or a flat city road. It consists of a telescopic fork and two conventional shock absorbers. As for the current price of a moped, now due to the crisis and other events, the cost of the Delta has increased several times and in Russia is at least 20,000 rubles. But don’t worry about this, and feel free to take this model, because it will justify itself with a long shelf life and good performance.

Moped Delta

This is an inexpensive and fairly reliable moped . buy a Delta 50 moped by placing an order on the website of the PR-TEH motorcycle store. Delivery in Moscow and anywhere in Russia.

Technical characteristics of the Delta 50 q2 moped

Engine : 49.9 cm3, four-stroke Weight: 68 kg Permissible load: 150 kg Transmission: mechanical Engine power: 4.5 hp Brakes: drum Fuel consumption: 2 l / 100 km Engine starting: electric, kick starter Wheels: alloy Tire size: 2.50x17 / 2.75x17

Colors: black, blue, red (raspberry).

Dimensions when packaged (in a box), m, d - w - h: 1.5 x 0.5 x 0.8

PRICE IS INCLUDED WITHOUT ASSEMBLY. ASSEMBLY 1000 rub.

Delivery to the following regions and cities of Russia: Far Eastern District: Khabarovsk, Ussuriysk, Arsenyev, Nakhodka, Komsomolsk-on-Amur, Belogorsk, Petropavlovsk-Kamchatsky, Birobidzhan, Yakutsk, Blagoveshchensk, Neryungri, Artem, Anadyr, Magadan, Svobodny, Yuzhno-Sakhalinsk , Vladivostok Siberian District: Novosibirsk, Abakan, Kyzyl, Novokuznetsk, Gorno-Altaisk, Ulan-Ude, Omsk, Barnaul, Kemerovo, Irkutsk, Krasnoyarsk, Tomsk, Chita Central District: Kursk, Kaluga, Ivanovo, Kostroma, Orel, Ryazan, Belgorod , Bryansk, Smolensk, Lipetsk, Tula, Tambov, Voronezh, Yaroslavl, Vladimir, Stary Oskol, Tver Northwestern District: Vorkuta, Pskov, Severodvinsk, Petrozavodsk, Pechora, Ukhta, Veliky Novgorod, Arkhangelsk, Syktyvkar, Vologda, St. Petersburg , Naryan-Mar, Velikiye Luki, Kaliningrad, Murmansk, Cherepovets Southern district: Stavropol, Maykop, Elista, Astrakhan, Krasnodar, Volgograd, Rostov-on-Don Ural district: Yugorsk (Sovetsky), Urai, Mezhdurechensky (Tyumen region), Nizhnevartovsk , Kamensk-Uralsky, Oktyabrsky (Tobolsky district), Ekaterinburg-KOR, Nyagan (Oktyabrsky district), Kurgan, Tyumen, Surgut, Purpe, Noyabrsk (Purovsky district), Magnitogorsk, Yekaterinburg, Khanty-Mansiysk, Raduzhny, Pionersky, Miass, Serov , Priobye, Pelym, Shadrinsk, Nizhny Tagil (Sverdlovsk region), Muravlenko, Kogalym, Pokachi, Korotchaevo, Salekhard, Novy Urengoy (Yamalo-Nenets Autonomous Okrug, Nadymsky District), Yuzhnouralsk, Chelyabinsk, Ekaterinburg-North, Zlatoust, Nefteyugansk (Khanty -Mansi Autonomous Okrug), Ishim, Nadym, Ekaterinburg-West, Beloyarsky (KhMAO) Volga District: Sterlitamak, Izhevsk, Penza, Saransk, Dzerzhinsk, Naberezhnye Chelny, Orenburg, Perm, Chusovoy, Orsk, Tchaikovsky, Ulyanovsk, Samara, Yoshkar- Ola, Togliatti, Kirov, Neftekamsk (Republic of Bashkortostan), Nizhny Novgorod, Berezniki, Kazan, Saratov, Buzuluk, Cheboksary, Orsk, Sarapul (Udmurt Republic), Solikamsk (Perm Territory), Ufa We also deliver to Kazakhstan in the following cities: Almaty , Astana.

CM. REVIEWS OF DELTA MOPEDS

CM. REVIEWS OF MOPEDS ALPHA 72

CM. REVIEWS OF MOPEDS ALPHA 110

We will help you profitably purchase the best equipment to improve your scooter.

Every visitor to this section will be able to buy a plastic body kit for the Alpha moped, as well as for scooters of various brands. The Scooter-ZiP company monitors the availability of products and organizes their shipment to other cities with the help of logisticians.

If your vehicle breaks down during operation, we can also help. We are ready to offer a wide range of spare parts for mopeds and scooters and guarantee their high quality. Now the repair of this category of transport will be simple and fast, because we have eliminated the need to search and wait for spare parts.

Why did TV in the USSR begin to show normally when hit with a fist? Everything is very simple

Probably each of us at least once in our lives has encountered this method of repairing radio equipment: Bang! fist to the body and everything worked. What was broken there and, most importantly, was it restored so quickly? Why did this method restore functionality before, but now it doesn’t help?

This question was asked on the TV masters forum. I liked this answer the most:

Inside expensive branded TV models supplied to the countries of the former USSR, an acceleration sensor is specially installed, which, upon impact, turns on a backup microcircuit instead of the burnt one. The developers specifically introduced this feature, knowing the peculiarities of national repairs.

The latest TV models have built-in artificial intelligence, which, based on the force of the impact, determines the seriousness of the owner’s intentions and switches to a backup circuit. By the way, you can try to negotiate peacefully with such models if you ask in a good way.

Our radio engineers always have a great sense of humor.

Let's look at all the reasons in order - there are not so many of them.

Innovators.

In pursuit of savings and cheaper products, the main thing is not to reduce quality. Alas, this is not always possible. This was the case with televisions in the USSR. The first televisions were lamp-based, which were considered devices with a limited service life. The lamp went out, they pulled it out and installed another one. For ease of replacement, the lamps were not soldered into the circuit, but were installed on the lamp panel.

For reliability, the lamp panel was made of special ceramics and the “legs” of the lamps were clamped with powerful springs.

An innovator was found who developed a lamp panel made of plastic, which is much easier to manufacture and cheaper.

We introduced these panels into all TVs. It turned out that plastic, under the influence of a hot radio lamp, becomes brittle over time and crumbles into pieces. The “legs” of the panel become deformed and electrical contact is lost and the TV stops showing.

When you hit the body of the TV with your fist, the heavy radio tube moves a little and contact is restored - and the TV began to show again. After some time, the contact went away again and the procedure of assaulting the equipment had to be repeated. It’s good that TV cases were made strong back then.

For a long time, televisions were assembled by hand, soldering all the contacts with a soldering iron. This is a grueling and monotonous job that few men could endure, which is why women have always worked on the assembly lines of radio factories. To increase production volumes, automatic soldering was introduced: a board with parts passes over a bath of molten solder and all contacts are soldered. This is ideal. In reality, the “legs” of some parts have time to oxidize and the soldering turns out to be of poor quality.

Over time, oxidation increases and contact is lost. When the body is hit, the part moves and electrical contact is restored, but not for long.

Microcracks on the board.

On the printed circuit board, the connecting wires are replaced by thin strips of copper foil. Their thickness is only 20-25 microns, so any mechanical impact can lead to a break in the foil strip (tracks on the board).

A blow to the body is rare, but you can restore contact, although not for long. I can say that this is the most dreary malfunction: you need to have eagle vision and a lot of patience to find microcracks.

Malfunctions occurred much less frequently: a broken wire in the harness, poor contact in the connector or in the channel switch.

I don’t know where American director Michael Benjamin Bay learned about the Soviet tradition of “fist” repair of radio equipment, but he showed this method very well in the film “Armageddon.”

Let me briefly recap the plot:

A huge asteroid is flying towards Earth and the Americans (once again) are sent to save humanity from death. Having landed on the asteroid, they plant a nuclear mine, but it turns out that they cannot take off back - the engines do not start, the electronic control units have failed. The Americans grab the documentation, frantically press the buttons - everything is useless, and only the imperturbable Russian cosmonaut Lev Andropov, with the help of a wrench and “some kind of mother,” quickly repaired the electronics of the American spacecraft and saved everyone from death.

Is it possible to bring modern TVs to life in this way? Alas, the current equipment can only be broken with a careless blow. Moreover, in 99% of cases, the cause of malfunction of modern equipment is “the wrong button was pressed” and only less than 1% of malfunctions require the intervention of a telemaster.

Alfa 110 moped wiring diagram

This abbreviation stands for Capacitor Discharge Ignition - ignition from a capacitor discharge.
Sprinkle talcum powder on the inside of the tire. Electrical diagram of Delta 50 mopeds without a tachometer The photo below shows a schematic electrical diagram of the Alfa, Delta moped and other mopeds that do not have a tachometer.

Change the oil in the gearbox with a warm engine after the first km, and then regularly after km in the following order: remove the filler and drain plugs; drain the used oil; Screw in the drain plug and fill in approximately cm3 of oil; screw in the filler plug; let the engine run for 3-5 minutes, shift gears alternately.

When starting a cold engine, press the float stop 22 fig. Problem identification is done using a multimeter.

Place part of one bead of the tire in the recess of the rim, use a spudger and a wrench to push the entire bead of the tire onto the rim and slide it towards the rim flange.

Brakes To adjust the front brake, a stop is installed on the brake pad disc. Check the operation of the gear shift mechanisms, clutch, and brakes.

Protect the paper element from contact with oil and gasoline. Obe3obPasha Leave a comment Over the past few decades, the domestic moped manufacturer has completely left our market, and Chinese analogues and new models have taken its place. Electrical wiring for the 157QMJ engine (Simplified) or how to start the engine without a moped

Comparative characteristics of models

Characteristics

The Alpha 110 motorcycle can be used both for riding on city streets and for long trips in the countryside.

Alpha. 2018 model

The latest Alpha model, which left the factory in 2022, received a number of updates:

• a quieter muffler, although many “alfists” for some reason, on the contrary, try to give the muffler more roaring sound;
• higher quality, grippy rubber;
• the updated speedometer-tachometer panel is a real gift for mopedists, since the design of the double aluminum can is already pretty boring;
• more contrasting colors of the motorcycle;
• Availability of new generation safety bars.

How to place an order and buy Delta mopeds with delivery:

Clear and simple process:

You choose the motorcycle equipment yourself in the catalog and fill out a purchase request. If it’s difficult to decide on an order or you want to get advice and place an order right away, you can leave a request here. The manager will calculate the delivery cost, answer questions and request all the necessary data to place an order.

You choose the motorcycle yourself in the catalog and fill out a purchase request. If it’s difficult to decide on an order or you want to get advice and place an order right away, you can leave a request here. The manager will calculate the cost of delivery, answer questions and request all the necessary data to place an order.

We try to work on an advance payment basis, as this eliminates the possibility of non-repurchase of goods and reduces our risks, which makes our prices for motorcycles cheaper than the market average. We can also send your order by cash on delivery, but in this case the cost of the motorcycle will be higher for you + we still request an advance payment of 15% to insure against non-repurchase. Cash on delivery is not available for all brands, please check. It is possible to get a loan, find out more. After sending the goods by the transport company, you can control the delivery using the track number.

We try to work on an advance payment basis, as this eliminates the possibility of non-repurchase of goods and reduces our risks, which makes our prices for motorcycles cheaper than the market average. We can also send your order by cash on delivery, but in this case the cost of the motorcycle will be higher for you + we still request an advance payment of 15% to insure against non-repurchase. Cash on delivery is not available for all brands, please check. It is possible to get a loan, find out more. After sending the goods by the transport company, you can control the delivery using the track number.

Receive the goods from a transport company in your city, and the purchase and sale agreement and PTS by mail or courier

Receive the goods from a transport company in your city, and the purchase and sale agreement and PTS by mail or courier

Appearance of Alfa and Delta mopeds

In terms of their configuration, these are identical mopeds, while even the design of the main components is also implemented in the same way, and the weight of both mopeds is also the same - 81 kg.
The differences between the models are only in appearance. So the Alfa moped is a mini-motorcycle with a spectacular chrome-plated muffler. A comfortable seat and a trunk on which the trunk is located. Alpha has low ground clearance, which makes it difficult to move on uneven roads. More suitable for city driving, lightweight, dynamic and beautiful.

As for the Delta, there is slightly higher ground clearance, it is 11 centimeters. It has a fundamentally different frame, the gas tank is only 4 liters, while the Alfa has 8.7 liters. In the Delta moped it is possible to remove the passenger seat, under which there is a trunk. Additional reinforcement on the frame, can also be used as a trunk. This bike has better cross-country ability and is more suitable for rural areas, where you also need to carry cargo besides yourself.

Despite the visible difference between the mopeds, their design is the same, the parts are interchangeable and fit together. The design of the bikes determines their cross-country ability and optimal operating conditions.

Since the popularity of mopeds has lasted for several generations, today on the streets of Russian and Ukrainian cities you can still see the old “Riga” and “Verkhovyna”, which were produced back in the days of the Soviet Union - surprisingly, they continue to function properly.

However, Alpha and Delta, which had already become famous, surpassed even Verkhovyna and Karpaty. There have been, are and will be debates about them forever. One half of the owners hate this motorcycle, the other considers it one of the most flexible and reliable. Let's try to figure it out.

Moped from China Delta - review and technical specifications

During the Soviet Union, very few brands of motor vehicles were represented on the vehicle market.
Therefore, the buyer had little choice. And these funds were not affordable for everyone. Today the picture has changed dramatically. The buyer simply “goes wild” at the offers. It seems that motorcycle manufacturers have arranged a competition among themselves to see who is better. They try to sell their goods by any means. But, basically, everyone offers the same thing: value for money and quality of the goods sold.

Vehicle popularity:

Now the attention of many people is directed to the choice and purchase of small motor vehicles: mopeds (scooters). And each of them is afraid of making a mistake when choosing this type of equipment.

We present to your attention the small-displacement moped "Delta" from the Chinese manufacturer Chongqing Wonjan Motorcycle Mfg Co., Ltd. This type of vehicle belongs to the “light motorcycles” category. I would like to say that the Delta moped will not leave the most demanding buyer indifferent. Since the manufacturer correlated the quality of the product and the price. In a short period of time, the Delta moped became very popular. Its popularity has spread widely among lovers of small, lightweight motorcycles. He became a “favorite” not only among motorcyclists in the CIS countries, but also far abroad. After all, the Delta moped combines quality, efficiency, and appearance (which is also important).

Chinese moped "Delta": characteristics:

This equipment has a four-stroke single-cylinder engine, the volume of which is forty-nine point five cubic centimeters, and a power of four horsepower. The moped engine is air cooled. The manufacturer also equipped this type of moped with a four-speed manual gearbox, and in other modifications - with a semi-automatic gearbox (this is at the discretion of the buyer: who likes what). The ignition system in the Chinese Delta moped is electronic, so it has a 4 ampere/hour battery and, accordingly, a generator is installed.

Eh, with the wind...

The weight of such a compact vehicle is 60 kilograms (as they say, if God forbid you get stuck, you can easily pull it out yourself). This cannot be done with a car, even a small one. Despite such simple technical characteristics of this type of motorcycle, it can easily reach a maximum speed of 55 kilometers per hour, and driving on our roads at higher speeds is extremely dangerous. However, I would like to note that the Delta moped can easily travel along a country road, thanks to the fact that the manufacturer has strengthened the shock absorbers.

Moped "Delta". Reviews:

As for reviews, of course, customer opinions differ. And there cannot be equally positive or negative reviews. Some people like the product, others are not satisfied with it.

Some owners of the Delta moped say that it is “simply a miracle.” There is no need to doubt the reliability of the engine. The engine can travel more than 6,000 kilometers without a single repair. And in general – not a moped, but a fairy tale.

Other owners say that the moped often loses power. Experts do not deny this fact. They claim that in order to increase the power in a moped, you just need to remove the limiters that are specially installed by the manufacturer, according to new European standards.

Still others are not satisfied with the fact that the moped develops low speed. I would like to speak out in support of the manufacturers of this moped - pay more, you will ride faster.

Conclusion:

Having read the article in detail, we can say that the Delta moped is an excellent vehicle in all technical characteristics in its price category.

Frequently asked questions and answers

Delivery is carried out by specialized transport companies, with whom we have accumulated successful experience over many years. Documents are sent by mail or courier service SDEK, as agreed with the customer

It is possible to work with partial prepayment for insurance in case the equipment is not purchased. The cost of equipment in the absence of prepayment increases by 5 to 15%. Ask for details by phone

Warranty support is provided under the conditions specified by the manufacturer. On average, the warranty is 12 months.

We are ready to provide additional discounts if their need is justified. For example, a competitor's account

A warranty card comes with the equipment. The purchase and sale agreement, transfer acceptance certificate, PTS or PSM (if the equipment is subject to registration), for greater reliability, is sent by mail or courier, as agreed with the buyer.

We work with organizations and provide invoices with allocated VAT. For all supplied equipment, we provide a full set of accounting and reporting documents: invoices, invoices, waybills, UPD and waybills. If necessary, we will send certificates of conformity. But we work with organizations on the same terms as ordinary buyers: we do not fill out 100-page packages of documents, do not sign contracts with deferred payment for six months, and do not participate in government tenders, auctions and competitions. As for everyone, 100% prepayment and delivery by transport company.

Do you still have questions or don’t know which model to choose? Our manager will tell you about each model of equipment and help with the choice, as well as calculate the cost of delivery

Some Delta mopeds have a scooter layout, but the body kit and cladding are less developed, so the models look authentic. The designs use a light and compact frame; in fact, it runs from the steering column to the rear pendulum, and can be almost horizontal or sloping towards the driver.

The engine, variator/gearbox and other important elements are hung from the bottom of the frame. They are not protected from small stones from the road, so some of the vulnerable elements are hidden under protective covers.

Peculiarities

The layout of Delta brand mopeds, close to that of a scooter, allows for free space on top of the frame, since the tank is integrated into the structure and is not located like a motorcycle. For this reason, the gap from the supporting beam to the seat is occupied by a basket for things. This provides extra space that frees up your pockets and hands. It is convenient to use it on long trips, for example, to the country or fishing.

Additional bags can be installed in several places:

• Behind the driver's seat there is a frame or place for its installation;
• Waterproof hard or soft bags are often hung on the sides of the rear wheel;
• There is a basket in front above the wheel, similar to a bicycle design.

That is why the technique is often used by hunters or fishermen, for country houses and cottages. Light weight and the ability to equip the vehicle according to your needs provide flexibility to two-wheelers. They will be appropriate for training a novice category A driver or a girl moving around the city.

Engines for Delta moped models start at 50cc; there are also more powerful ones, reaching 110-125 cm3. The latter can easily cope with a weight of 100-120 kg and at the same time will have a sufficiently high speed for comfortable movement.

A short video report on the repair of Dedovsky motor V 50M moped DELTA USSR

Hi all. I made a short video in which I will tell you what parts will need to be changed in this old engine. And so, first of all, in the market from grandfathers who sell various belongings, I found original bearings for the gearbox made in the USSR, but I didn’t find the original ones for the crankshaft, I had to buy flood bearings, they said the Polish ones were good, I also had to change the entire gearbox since the old one was in a very poor condition, yes, I sawed down the gearbox gears, I did this so that the speed would not bark, I think those who rode similar mopeds as children will understand me, I completely replaced the clutch basket, also had the cylinder bored, restored the threads on the studs, tidied up the bolts that hold the engine together, here Something like this, now I’m waiting for the cylinder and will remove the complete assembly of this motor. Thank you all for your attention.

No duplicates found

3K posts 8.6K subscribers

Community Rules

Add only posts on the topic of the community, express your opinion with reason. We prohibit:

• Rude or provocative communication (for example, wishes for death or injury)

• Insulting community members

• Insulting the author of the post or the identity of the opponent in the dispute

• Attempt to introduce politics into discussions

This behavior will result in the comment thread being hidden and is considered a warning. Repeating this behavior may result in being banned from the community.

We do not welcome hackneyed jokes about death, be more original!)

Oh delta. childhood dream. It never came true(

This is not attentiveness and a C in Russian