How to disassemble a wheel on a scooter (photo and video)

Sequence and features of work execution

It is easier to repair the wheel yourself when another tube is available. It is quite difficult to deflate a tubeless tire without leaving gaps - it requires a sharp increase in pressure, which only a high-performance compressor can generate.

But if you still have to change the tires, you can use the “folk method”. After unscrewing the nipple, pour some gasoline inside. Shake the wheel and ignite the steam coming out through the hole. There will be a small explosion causing the sidewalls to settle on the rim.

Regarding safety, this procedure is not capable of breaking the tire, since it has a good margin of safety. But this should be done not in the garage, moving away from the cans of gasoline at a great distance, so as not to provoke a fire. It is not recommended to perform such manipulations with a new copy, since unburned gasoline will remain inside. Wear from it will accelerate several times.

Rear-mounted tires are more likely to wear out and puncture because they account for approximately 70 percent of the weight. The reason is simple - the driver's body is located closer to the rear than to the front.

Reasons for withdrawal

There are usually several reasons why an owner has to remove a wheel:

When we talk about wheels, we mean absolutely all their components and characteristics - tires, wheels, size, type, material of manufacture, etc.

First of all, I would like to say about tires, on which many scooter riders, especially beginners, often try to save money. In this regard, used tires are purchased, which can result in troubles on the road. It is worth noting once again that good tires are one of the fundamental aspects of safe driving.

The tire provides a level of riding comfort as well as maneuverability of the scooter. Thus, used tires can cause accidents, which will entail much higher costs than purchasing new tires in the first place.

In appearance, used tires may be ideal, however, this is not a sign of its integrity and quality, since the naked eye can easily not notice minor damage, cord deformation, microcracks in the rubber that violate the tightness of the product.

All this can lead to an unexpected tire rupture while driving, which entails negative consequences. Thus, the real savings when purchasing tires can be achieved by brand. After all, the more famous the company that produces tires, the more expensive they are.

How to choose wheels for a scooter

When choosing tires for a scooter, you should pay attention to:

• Tire expiration date. Strange as it may sound, the tire is suitable for safe use for 4-5 years; after this period, the rubber begins to harden, gradually losing its elasticity. Accordingly, if the tire was manufactured relatively recently, it will last much longer.
• For marking. Depending on what time of year the scooter will be used, you should purchase the appropriate tires. As a rule, the reference point is the average daily temperature, when it drops below a certain level, you should choose a different type of tire.
• To the frequency of the groove network. The grooves serve to drain water from the traction patch, which ensures safe driving in the rain.

Tire classification

There is also a classification of tires into classes and design. Regarding the latter, tires can be tubed or tubeless. Each class has its own pros and cons.

According to experienced scooter riders, tubeless tires are better and more reliable, since in case of a puncture, which happens unexpectedly and is dangerous at high speeds, they are able to hold air for some time, which allows them to get to a service station to replace the damaged wheel.

However, tubeless tires require special rims, which involve additional expenses.

In short, replacing a tire is the most common and common reason that requires removing a wheel on a scooter. By and large, there is nothing complicated in this process if you have the necessary tools at hand, a little perseverance and patience, and also know the sequence of actions that need to be performed.

Table. Correspondence of motorcycle tire sizes and decoding of abbreviations

Tire size in inches Tire size metric 1009080

How to remove a wheel on a scooter

When removing wheels, it plays a role which wheel is being removed - rear or front. This is related to the design of the scooter as a whole. Let's first look at how to remove the rear wheel on a scooter. The first step is to remove the muffler for convenience.

You can find information about this on the Internet or ask more experienced mechanics.

Once the muffler is removed, you can proceed to the following steps:

1. Position the scooter so that the wheel is suspended. To do this, you can use a footrest or any other stand. At the same time, it is important to fix the mobility of the scooter so that it does not fall over at the wrong moment.
2. Find the wheel nut and, holding the wheel with your hand, unscrew it. To do this you will need a socket wrench.
3. Remove the washer and remove the wheel from the gearbox.

Wheel assembly

Before installation, determine the direction of rotation of the tire - there is a special arrow on the left or right side. If it is missing, installation can be done in any direction.

Place as much of the tire on the rim as you can. Only then take hold of the screwdrivers or mounting brackets. Manufacturers recommend pumping the rear tire up to 2.5 kg/cm2. If you have a tubeless tube, the pressure increases to 3.5. Excessive pressure is only required at the initial stage so that the sidewalls are firmly seated in the rim. Then reduce the pressure to the manufacturer's recommended pressure.

How to remove the rear wheel on a scooter

Every motorcycle owner has at least once had a flat rear wheel that required prompt replacement. You should not assume that changing a tire on a moped is much easier than doing the same manipulations on a car - this is not so.

It should also be noted that replacing the rear wheel on a scooter is much more difficult in terms of implementation than dismantling the front one, since you will have to disassemble most of the unit.

List of required tools

Before removing the rear wheel of the scooter, you will need to stock up on tools:

• socket wrench;
• wooden block;
• a piece of clean cloth;
• a little patience;
• A bit of luck.

Procedure

1. First you need to remove the muffler.

Place the scooter on the stand so that the wheels dangle in the air. Remove the seat, the lower plastic skirt, and then slightly unscrew the bolts that secure the muffler to the frame (there may be 2 or 3 of them). Please note that they cannot be unscrewed completely.

2. Using a socket wrench, unscrew the nuts securing the muffler to the cylinder, and then completely remove the bolts.

When removing the muffler itself, hold it with your other hand. Do not lose the rubber gasket that is located between the muffler and the cylinder.

If you find that carbon deposits have formed in the muffler, you should clean it off by heating the outer surface with a blowtorch and walking inside with a wire brush. After removing the muffler, the cylinder outlet should be covered with a piece of clean cloth.

3. You can change the wheel on your scooter as soon as you apply the rear brake and unscrew the nut.

Usually it is easy to remove, but if you have difficulty, you should block the wheel by inserting a wooden block into the disc. To prevent the wheel from spinning, open the variator cover to hold the clutch washer.

4. After this, you need to remove the wheel from the spline and begin the actual repair.

Once you have finished replacing or repairing the rear wheel, reassemble the dismantled parts of the moped in reverse order. Before assembling the scooter, do not forget to treat the splines with grease.

If, after removing the wheel from the scooter, you find serious defects, it is better to take the spare part to a tire shop, where they will repair it efficiently or advise you to replace it.

Scooter wheels

When driving a vehicle, special attention is paid to the safety of absolutely all road users. Achieving maximum safety during a vehicle is possible only with an integrated approach, which includes knowledge and compliance with traffic rules, as well as the complete serviceability of absolutely all components and mechanisms of the vehicle.

Wheel functions

The wheels of a vehicle play a very important role in safe movement, especially when it comes to any two-wheeled motor vehicles, in particular scooters. After all, worn out tire tread, deviation of tire pressure readings from the norm, as well as any other more serious malfunctions can lead to serious consequences that sometimes cost a human life. Therefore, wheels should be given no less close attention than all other components and assemblies of the scooter.

Scooter wheels must perform the following functions:

• ensuring good grip between the vehicle and the road surface;
• dampen shocks and vibrations while driving;
• carry out full transmission of traction and braking forces created by the scooter.

When we talk about wheels, we mean absolutely all their components and characteristics - tires, wheels, size, type, material of manufacture, etc.

First of all, I would like to say about tires, on which many scooter riders, especially beginners, often try to save money. In this regard, used tires are purchased, which can result in troubles on the road. It is worth noting once again that good tires are one of the fundamental aspects of safe driving.

The tire provides a level of riding comfort as well as maneuverability of the scooter. Thus, used tires can cause accidents, which will entail much higher costs than purchasing new tires in the first place. In appearance, used tires may be ideal, however, this is not a sign of its integrity and quality, since the naked eye can easily not notice minor damage, cord deformation, microcracks in the rubber that violate the tightness of the product.

All this can lead to an unexpected tire rupture while driving, which entails negative consequences. Thus, the real savings when purchasing tires can be achieved by brand. After all, the more famous the company that produces tires, the more expensive they are.

How to choose wheels for a scooter

When choosing tires for a scooter, you should pay attention to:

• Tire expiration date. Strange as it may sound, the tire is suitable for safe use for 4-5 years; after this period, the rubber begins to harden, gradually losing its elasticity. Accordingly, if the tire was manufactured relatively recently, it will last much longer.
• For marking. Depending on what time of year the scooter will be used, you should purchase the appropriate tires. As a rule, the reference point is the average daily temperature, when it drops below a certain level, you should choose a different type of tire.
• To the frequency of the groove network. The grooves serve to drain water from the traction patch, which ensures safe driving in the rain.

Tire classification

There is also a classification of tires into classes and design. Regarding the latter, tires can be tubed or tubeless. Each class has its own pros and cons. According to experienced scooter riders, tubeless tires are better and more reliable, since in case of a puncture, which happens unexpectedly and is dangerous at high speeds, they are able to hold air for some time, which allows them to get to a service station to replace the damaged wheel. However, tubeless tires require special rims, which involve additional expenses.

In short, replacing a tire is the most common and common reason that requires removing a wheel on a scooter. By and large, there is nothing complicated in this process if you have the necessary tools at hand, a little perseverance and patience, and also know the sequence of actions that need to be performed.