The air that enters the interior of any car contains a huge amount of dust and harmful impurities. Every new car is equipped with a cabin filter that cleans the air, but it needs to be changed periodically. The cabin filter in a Chevrolet Niva must be changed at least every 15,000 km.
If the machine is operated in extreme conditions, the air is heavily polluted, then replacement must be performed every 6-8 months. If the windows begin to fog up heavily in winter, and in the summer you notice a characteristic odor in the interior, it’s time to replace them.
Why change the Chevrolet Niva cabin filter
If the cabin is cold and the windows are sweating, the heater is not blowing well, then a clogged cabin filter can be blamed.
Fortunately, this is very easy to fix - replacing the Chevrolet Niva cabin filter with your own hands is a simple periodic maintenance procedure. The Chevrolet Niva repair manual indicates the frequency of replacing the cabin filter every 15,000 km or once a year. That is, at every maintenance, with the exception of the first, so-called “zero maintenance”.
The cabin filter, despite the name, is not located in the cabin, but under the hood, closer to the windshield, and is closed with a lid.
After opening the hood, you need to unscrew the 5 screws on the cover under the windshield on the passenger side. Having done this, you can lift the cover and find the Niva Chevrolet cabin filter. The filter should be pryed with a screwdriver and pulled out of its seat.
Before installing a new filter, you should clean the seat from debris. Don't worry about which side to install the cabin filter. On Shnivy it can be installed in the seat only with one side, with the arrow pointing up. Having installed the filter back, all that remains is to tighten the cover screws back.
Lada 4×4 3D FL GelendVAZen › Logbook › Cabin filter for Niva 2022 FL
The thought has been tormenting me for a long time - I need to install a cabin filter, because the mask on my boot is not enough, the machine is new, and dust flies into it, like in a tractor. I began to study this issue. I found articles where people install filters from different manufacturers, first I ordered Marshall
- x.z. who is this, but the quality is worse, and some kind of FilterService,
seems like the original for Niva. By the way, a small educational program for those who don’t know, Niva Urban is not a special or different Niva, Urban is a complete set! Luxury + Air Conditioning package, just in a plastic body kit with a different color of seat inserts, with the name Urban. That's all! There are no more technical changes! Not at all! ALL THE SAME! Next, filters arrived, Marshall 2 pieces, but FiltrServis 1 piece, although there should be 2, yes, and the box is not even the size of the filter - again, it’s tin from AvtoVAZ. As a result, the marshal is smaller both in height and width, it won’t stand up without collective farming, it’s been put aside until better times, I’ll glue the perimeter with thick foam rubber - like I’ll make a frame and it will fit then. But the filter service, if placed vertically, will not fit either, the height is much higher, BUT! If you push it deep into your boot under the torpedo (sorry, I didn’t take a photo) and lay it horizontally, it fits perfectly! The cabin filter should lie as it should, and not stand in a boot. This filter was installed fraternally by a friend on his car with air conditioning, also FL 2022, because... at that moment he needed it more because of the air conditioner, before he was kicked out of the cabin and the climate heater did not have time to pick up dust. Later I came across another TSN filter, a regular one, which is placed vertically in a box,
I was captivated by the price - 183 rubles for 2 pieces, versus 430 for 2 pieces of coal marshals + collective farming, and something like 300 for 1 piece of filter service. The quality is nothing special, ordinary, thin, paper, white... approximately close, like the original on Hyundai/Kia. It fit well, moderately tightly, the upper grille of the boot fit normally and in the correct position, just a little tighter, but the filter is not deformed - I checked. Thank you to everyone who finished reading this super mega crap, but someone may still find this information useful. Articles in the photo. Smooth roads and clean interiors to everyone!
Source
How to change the Chevrolet Niva cabin filter?
Changing the cabin filter element is determined by its maintenance regulations and attention not only to one’s own well-being and health, but also to those of passengers. The time to change the cabin cleaning element is determined by a number of different factors. First of all, it is necessary to take into account the conditions in which the car is operated.
Read more: Changing the oil in the engine of a Kia Spectra car, step-by-step instructions and photos
For example, if you mainly drive on dirt roads, which are significantly different from asphalt roads because they are more dusty, then you will need to replace the filter much earlier than indicated in the instructions that come with the car. According to car service professionals, the cabin filter element should be changed every 15 thousand kilometers.
If you drive rarely and on well-paved roads, then you can change the filter material less often. However, be that as it may, this period must be within six months. In this matter, it would be a good idea to take the advice of experts who recommend replacing the cabin filter every six months at the beginning of autumn and spring.
The cabin cleaning barrier is a difficult filter material, since the comfort inside the car depends on its condition, but the main thing is that it prevents harmful substances from entering the cabin, which ultimately end up in the lungs of passengers, which can lead to various colds and allergic diseases. And this is doubly dangerous if there are small children in the cabin.
After the specified active period of use has expired, the filtering characteristics of the system are significantly reduced and it retains less and less all kinds of harmful substances and microorganisms.
A dirty filter is an ideal environment for bacteria to grow, also because the cabin cleaner is located in a place where ultraviolet rays do not penetrate. It is these dark, damp and warm places that are the best place for fungi to grow. This is especially true for inexpensive element filters, since they do not provide disinfectant impregnation.
The filter element guards the cleanliness of the air entering the cabin. It is he who has to pass a huge amount of air through himself and cleanse the contaminants that fill the road air. Its structure contains a paper sheet that allows air to pass through itself, while dust particles remain on the sheet.
Lada 4×4 3D re:Build 1.8 › Logbook › The most correct cabin filter on NIVU (VAZ 21213)
Good day. It’s not without reason that it’s such a big name, since I’ve been hatching this idea for a very long time. How to do it right the first time.
Dust in the field is a common occurrence, because it does not always drive on good roads, unlike the same 6k. All sorts of twigs and sticks in the stove were very annoying. The last straw for my thoughts was the appearance of small pieces of dirt after these rides.
1)
Everyone farms differently.
But all this is not true, the first rain or snow and there is a bathhouse in the cabin.
Many people buy cabin filters from Nissan Pathfinder\Navara, but it fits in height and width:
But its thickness is 25mm, the damper will not close completely. Let's put this idea aside.
And we buy a cabin filter from Hyundai Accent:
And it doesn’t prevent the flap from closing at all. If you find it snagging, you need to bend it a little towards the interior with your hand.
We install it vertically in the boot, in front of the damper:
A hole is formed on top, close it with pipe insulation:
Which can be purchased at any hardware store.
Well, for additional protection I put on a mosquito net:
2)
Go ahead. So that our filter remains dry in any situation, so that less dirt flies and the stove blows better, we install an APS air intake, which I received as a gift on February 23rd:
The most correct design! The aerodynamics of the Niva are such that oncoming traffic willingly crashes into the almost vertical windshield and just as willingly flies into the stove.
Many nivavods felt this by turning the usual air intake, which is directed forward of the movement, vice versa towards the glass:
And in the end we get this look:
And also complete protection from:
— Mud — Snow — Water — Midges, branches and other fauna
And plus there is no need to turn on the heater at speeds above 60 km/h, it blows just fine!
Thanks to all! I definitely recommend this modification to all farmers! Good luck on the roads!
Filter selection
Typically, car enthusiasts choose a new Chevrolet Niva cabin filter produced by the Nevsky Filter company (product order number NF-6004). But the size of such a device is often larger than the seat. Therefore, many owners install filters from the manufacturer Kalina with catalog number 11180-8122010-82 - for a regular filter and 11180-8122010-83 - with carbon filler.
The dimensions of these filters are slightly smaller, but they have a soft frame and a foam seal around the perimeter. Due to this, the devices easily fit into place and provide good air purification. Other manufacturers of quality filter elements are Big Filter (part number GB-9831) and TSN (part number 9.7.26).
First option
The cover is attached to the panel using a small bolt and sealant. Take a convenient screwdriver, unscrew the screw and cut off the sealant. The cover is easy to remove.
Lightly pry the filter with a screwdriver and then remove the element. Carefully remove from the grooves. Over a long period of operation, a lot of dust accumulates, which can easily scatter throughout the cabin and fly into the air duct.
Next, a new dirt barrier is installed. Read the installation instructions. It is important to place the paper part on the correct side, otherwise the replacement will be useless. For convenience, manufacturers mark their products with arrows.
Carefully remove any remaining old sealant. Degrease the surface, apply fresh sealant and return the cover to its place. After making sure that everything is level, you can screw in the self-tapping screw.
For most car enthusiasts, removing part of the frill seems to be the best option, because there is no need to bother with sealant. There is also no risk of damaging the cladding when removing the old sealant. For many, this option is the fastest.
Lift the hood and unscrew the screws securing the frill. The element has three screws, which are located at the top.
Lift the plastic panel and carefully remove the filter material. Replace with a new one and replace the plastic. Screw the fixing parts into place.
In the video below you can watch the entire replacement process. From all of the above, it is time to conclude that in a Chevrolet Niva you can replace the cabin filter yourself. There is no need to have special skills.
Recommendations:
- When purchasing a new filter, pay attention to which vehicle it fits.
- Inspect the integrity of the packaging. Damaged material will be useless during operation.
- Purchase parts only from trusted stores to avoid purchasing low-quality goods.
There is no need to clean the filter frequently. It is safer for health to regularly replace the material.
How to replace
You can replace the cabin filter yourself; there is nothing complicated about this procedure. The frequency of changes depends on the operating conditions of the vehicle. The dustier the area you move through, the more often you need to change it. There are two replacement methods: one with complete or partial dismantling of the frill; the other - through a special hatch made specifically for these purposes.
Method 1
- Open the hood lid and unscrew the screw that secures the hatch to the frill on the passenger side.
- Cut off the sealant from the lid and open the hatch.
- Remove the old filter (take it out carefully so that dust and dirt accumulated on it do not spill into the heater air duct).
- We remove the packaging from the new element and firmly install it in place of the old one (it must be facing the right way, for this there is an arrow in the direction of flow on the frame).
- We clean off the old sealing material from the lid and the frill itself, and apply a new one around the entire perimeter of the lid (sealing is needed to prevent water from entering the interior ventilation system).
- We install the lid in its place and remove the excess sealing material (for peace of mind, you can apply sealants around the entire perimeter of the lid and on top).
- We check the operation of the heater in all operating modes.
Method 2
To replace with partial removal of the trim under the windshield you need:
- Raise the hood and unscrew the frill fastenings (six screws, all on top).
- Lift the edge of the lining and remove the old filter element.
- After removing the dirt and dust accumulated there, install a new filter.
- Reassemble everything in reverse order.
These recommendations are suitable for anyone who is thinking about how to change the cabin filter. The second method is more suitable for those who do not have sealant or silicone on hand; you need to unscrew more screws, but the time will be the same.
Article rating:
Loading…
Share with friends: Add a comment
How to change it yourself?
You can change the cabin filter on a Chevrolet Niva car at a service station or yourself.
To work on changing the filter on a Chevy Niva 2012, 2014, 2022, you must have the following materials:
- new filter;
- silicone sealant for sealing the lid (for example, ABRO red AB-11);
- Phillips-head screwdriver;
- flat blade screwdriver.
The video from the Garazhnik channel shows the process of replacing the filter on a 2013 Niva.
Replacing the cabin filter on a Chevrolet Niva
The cabin filter performs the main function of cleaning the air in the car cabin, and over time the part must be replaced, along with air, oil and other filters. The driver can do this work independently, saving not only money, but also time.
How to replace the cabin filter in a Chevrolet Niva, read the detailed instructions in the article below.
Timing for replacing the cabin filter
The cabin filter in a car is an unremarkable detail that is hidden from prying eyes. It is located behind the glove compartment and does not attract attention until an unpleasant odor appears in the cabin. Also, when the SF is polluted, windows often fog up, and the stove and fan function poorly, even at maximum speed.
A malfunction of the cabin air filter can also be detected during an external inspection, but to do this it will be necessary to remove the glove compartment. For this reason, many drivers are in no hurry to change the SF, and in vain!
The cabin filter not only cleans the air in the cabin from dust and dirt. This element also holds plant pollen and pathogenic bacteria on the surface, which have a detrimental effect on human health.
Today SF is installed in every car. At the same time, the part is not durable and requires replacement after a certain mileage - 15-20 thousand km. In some cases, filtration is changed more often, depending on the operating conditions of the vehicle.
On a Chevrolet Niva, the cabin filter is replaced during scheduled maintenance. However, this work is not difficult, and any driver, even a novice, can handle it, provided that the instructions described below are followed.
Filter location in Chevrolet Niva
In modern Chevrolet Niva car models, the cabin air filter is installed on the passenger side, in the engine compartment under the wipers. In order to dismantle the device, it is necessary to open the cover of the protective box, then unscrew the bolts of the holding structure.
The air filter is installed in a special cassette. When replacing this part, it must be washed.
Choosing a cabin filter
Today, all SFs are divided into two types:
- standard (anti-dust) devices;
- coal SF.
Standard filter devices are made of corrugated cardboard or synthetic fiber. The surface of the SF is multi-layered, due to which the atmospheric flow passes through several degrees of purification. The filter retains dirt, dust, leaves, pollen, and exhaust gases by 96%.
Coal SF, in turn, can also neutralize unpleasant odors in the cabin and additionally have antimicrobial properties.
When choosing a new filter device for the interior of a Chevrolet Niva car, you should follow the instructions from the manufacturer. It is important to purchase a model that is suitable in size.
Preparing for replacement
In order to replace the cabin filter in a Chevrolet Niva, you need to prepare the following tools:
- clean rags;
- new air filter;
- means for cleaning the seat;
- crosshead screwdriver;
- sealant.
Replacing the filter
All Chevrolet Niva cars produced are equipped with a cabin filter. Over time, the filter may become clogged with dust and stop filtering the air. In this case, the equipment must be updated every 15,000 km.
If the car is used in difficult climatic conditions, when the air is heavily dusty, then the filter is changed every six months. Most often, the cabin filter needs to be changed if the following problems arise:
- Windows fog up in the cold season because the heating system fan is not able to provide sufficient air flow.
- Cars with air conditioning smell of dust and other contaminants.
If the equipment is not replaced in the listed cases, this may result in problems with the radiator of the air purification system, which is unlikely to be cleaned.
It is quite possible to replace the cabin filter in a Chevrolet NIVA not at a service station, but with your own hands. For self-installation, you must prepare the following equipment and tools:
- New filter.
- Silicone sealant to seal the lid.
- A screwdriver with a Phillips and a flat blade.
- It is advisable to watch a video on the Internet that will show how to quickly and efficiently install an unused filter.
The cabin filter is replaced according to the following algorithm:
- First of all, use a Phillips screwdriver to unscrew the screw that holds the cover in place.
- Using a flat blade screwdriver, install the lid and frill tightly together. Lift the roof up and then remove it.
- The old filter is then removed.
- The area where the filter was located is cleared of dust and other contaminants.
- After this, a new filter is installed.
- The filter must be installed in the direction of the flow in which the air moves. This direction is indicated by an arrow on the filter.
- The cover is lubricated with fresh sealant and installed in its original place.
The installation is completed by tightening one or more screws.
As a result, it should be said that you can replace the cabin filter in a Chevrolet NIVA yourself and it will not take much time. But it is precisely this action that will be able to protect the driver and passengers from serious health problems in the future.
Tired of paying fines? There is an exit!
Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.
- Absolutely legal (Article 12.2);
- Hides from photo and video recording;
- Suitable for all cars;
- Works through the cigarette lighter connector;
- Does not cause interference to radios and cell phones.
Find out details
Replacing the cabin filter in a Chevrolet Niva
Replacing the cabin filter is easy. According to the manufacturer's recommendations, the procedure should be performed once a year, but in fact you will have to do this more often if the car is actively used. The cabin filter is located under the trim on the left side under the hood and is hidden by a plug. To access it you will have to unscrew 1 screw. It should be noted here that you should not try to clean it of dirt under any circumstances. It is not suitable for re-repair and is only replaced with a new one.
The cabin filter is replaced with a new one, a rag that can be used to cover the filter frame, and a special silicone-based sealant . Air filter replacement steps:
- removing the old dirty filter;
- cleaning the seat from dirt and dust;
- installing a new air filter;
- sealing the frame at the joints;
- application of rags.
Everything is extremely simple, even an inexperienced master can handle it. What is the benefit of replacing the cabin filter? Firstly, cleaner air in the cabin, and secondly, more efficient ventilation, which is important during the summer period of vehicle operation, when all possible methods are used to condition the interior volume of the cabin.
Step-by-step replacement instructions
Replacing the cabin filter in a Niva Chevrolet is a simple process, but since it has to be done systematically, be sure to read the detailed instructions.
Where is?
Location of the barrier under the hood
The cabin filter element in the Niva Chevrolet is located under the trim, in front and slightly to the right. To gain access to it, you need to unscrew one screw and remove the cover.
What will you need?
The replacement process is simple and does not require many special tools:
- new cabin filter;
- sealing compound;
- rags;
- screwdriver.
Stages
Before replacing, you need to turn off the engine, turn on neutral speed and set the car to the handbrake.
- Unscrew the screw using a screwdriver and carefully pry off the cover.
Raise the lid
- We take out the filter filter.
We pry up and take out the filter element
- Using a rag, clean the body from dust.
- We clean the housing from the remaining sealant around the perimeter. It is better to do this with sandpaper.
- We print out a new filter and put it with foam on top.
We install a new one
- We treat the contour with new sealant.
- We put the cover in place and tighten the self-tapping screw.
- We turn on the engine, check the car, turn on the heater.
Filter location
Self-tapping screw that needs to be unscrewed
Old element
Retrieving the old element
New filter material installed
We install a new one
If everything works fine, then we can consider the work finished. If anything is still unclear, watch the video.
Replacing the air filter
To ensure smooth operation of the Chevrolet Niva engine, you need to change the air filter in a timely manner. According to the manufacturer's recommendations, this procedure is carried out every 10-20 thousand km.
If you do not change the filter in a Chevrolet Niva for more than 50 thousand km, this will result in a drop in performance and debris entering the combustion chamber compartment. This increases the amount of soot, and in the future will require decoking of the engine.
Replacing the air filter is not difficult. First you need to unscrew the screw, remove the cover and pull out the old sponge. It is recommended to clean the inside of the case with a rag and gasoline. After 5 minutes you need to install a new part, tighten the lid and drive at least 5-8 km. It is recommended to replace the air element in a Chevy after changing the engine oil.
When to change the filter
The filter is part of the forced air circulation system, which is performed by the on-board air conditioner. Of course, there are certain sanitary standards for changing the cleaner, but the degree of its contamination depends on the following factors:
- where exactly do you operate your car (dirt roads or asphalt);
- how often do you use your car?
- do you keep it clean?
Auto mechanics at the official Chevrolet showroom advise changing this part every six months or after 10-15 thousand kilometers. Usually, according to the rules, it is recommended to replace them in early spring and then in the fall.
Remember, the air barrier has a warm, damp environment in which all kinds of fungi and hard-to-remove mold thrive.
Replacing the fuel filter
The fuel filter is installed at the bottom of the car, in front of the right rear wheel, and is covered with a plastic casing. We carry out the work on an inspection ditch or overpass. The fuel in the power system (with the ignition on and for some time after it is turned off) is under pressure. Therefore, if we replace the filter immediately after a trip or after turning on the ignition, it is necessary to relieve the fuel pressure in the power system.
If the ignition has not been turned on for a day or more, there is usually no fuel pressure in the system. This can be checked by unscrewing the fuel rail fitting cap and pressing the spool rod.
Reg.: 12/06/2004 Threads / Messages: 628 / 51730
Reg.: 02.02.2005 Threads / Messages: 16 / 769 From: Moscow, Chertanovo. Age: 57 Car: 2121395
Reg.: 12/06/2004 Threads / Messages: 628 / 51730
Reg.: 07.28.2005 Threads / Messages: 1 / 2646 From: Ivanovo Age: 43 Car: Nivka2121. g.v. worn-out 1.9i and other minor tuning Murzik MV 300TD 1993
Reg.: 12/06/2004 Threads / Messages: 628 / 51730
Name: Sergey Reg.: 03/09/2005 Threads / Messages: 3 / 599 From: Moscow, Nizhnyaya Maslovka Age: 65 Car: Car 21214-20, 2003, Kyron, diesel, manual
Source
Where is the filter located?
The cabin filter in a Chevrolet Niva car is located on the ventilation duct, which is an air intake. It can be found on the right side of the windshield under the plastic trim, which is located on the windshield wiper trapezoid, secured with a self-tapping screw.
It should be noted again that the role of the cabin filter is great. And if it becomes clogged, it must be replaced as soon as possible. Most practicing car enthusiasts recommend purchasing a new filter to change, which is produced with article number NF-6004.
The cost of a cabin filter in a Chevrolet NIVA ranges from 160 to 310 rubles. In addition, you must definitely purchase fresh sealant, the price of which is approximately 120 rubles. However, when installing a cabin Nevsky filter, it often turns out that the dimensions do not match. The cabin filter of the named company has a larger seat than is expected in this car.
In this regard, many car owners prefer to purchase analog cabin filters, which are in no way inferior in quality to the original.
| Analogue | vendor code | Cost, in rubles |
| General Motors | SF4 | 165 |
| FORTECH | FS053 | 400 |
| LYNXauto | LAC1906 | 350 |
| Big Filter | 1118812201003 | 300 |
| Mann-Filter | CU26004 | 700 |
Such filters are slightly smaller in size and, in addition, have a soft frame and a foam rubber seal. This makes it easy to install the device and ensure high-quality cleaning of the air entering the cabin. The technical specifications recommend changing the cabin filter depending on the conditions in which the car is operated, but at least once every six months or a year.
However, experts recommend that car owners rely on personal feelings. If any health problems arise, the filter must be replaced. Since its purpose is to provide comfortable conditions for the driver and passengers. Most practitioners believe that the filter needs to be replaced in early spring and autumn. If the filter is not changed for a long time, this can lead to the appearance of mold in the filter and the spread of bacteria in the car. And, as a rule, it is almost impossible to remove mold.
Car cabin filter
You should not consider the cabin filter of your Chevrolet Niva car as a regular consumable item.
After all, it performs one of the most important tasks among all devices - it purifies the air and maintains a comfortable microclimate, but the main thing is that a properly functioning filter does not allow harmful substances to enter the cabin, which means they do not enter the lungs of passengers and the driver. Creating such conditions is especially important for people prone to allergic reactions to dust and other similar substances, as well as children.
After a certain period of active use, the adsorbing properties of the cleaner are significantly reduced. It is less and less effectively able to absorb various harmful substances, as well as bacteria.
If you do not change a dirty filter for a long time, mold may even begin to grow on its surface, and dealing with this problem will be much more difficult than simply replacing the purifier.
If you do not take care of replacing it in time, the filter will become an ideal environment for the proliferation of microorganisms, because most often this cleaning element is located in a place that is not susceptible to ultraviolet rays, respectively, bacteria and fungi do not feel any influence, and heat and humidity are optimal promote their reproduction. This is especially true for cheap filter models, because they do not contain aseptic impregnation.
