How to make a motorcycle stand with your own hands

Publication date: September 16, 2022. Category: Motor vehicles.

Like any other vehicle, a motorcycle requires periodic maintenance. However, if a car can be driven into a pit and repairs can be carried out without problems, then such a trick will not work with a two-wheeled “horse”. In this case, a special motorcycle stand is required, which is a rigid welded frame structure capable of lifting the “bike” and fixing it at the desired height.

Such “stands” can be purchased without any problems at any specialized store, but they will cost at least 5,000 rubles. Some motorcyclists prefer to use improvised stands for these purposes, the role of which is most often played by hemp. However, this is not entirely convenient. Therefore, it is much easier to make a stand yourself.

What will it take?

First of all, it is necessary to prepare an approximate drawing of the future structure. You can take a photo of any finished stand as its basis. In our case, it will be a kind of stool with four lifting legs, which will be raised to the desired height using any old jack.

The main thing is to take the necessary measurements. First, let's measure the ride height. For cross-country models it is approximately 32 mm. Accordingly, the minimum height of the stand for storing a motorcycle will be about 26 mm. In order to carry out repair work, the unit must be raised by approximately 40-45 cm. Accordingly, for this you will need to purchase 4 pipes 30 x 30 mm about 20 cm long and the same number of pipes of a slightly smaller diameter (25 x 25 mm) about 25 cm long One pipe should fit into the glass (pipe of a larger diameter) not too tightly, but it is better not to allow the elements to dangle too much. The optimal space between the pipes is considered to be 1 mm, so if you purchase parts of a different size, you should take this into account.

In order for the structure to be a full-fledged lift, when making a stand for a motorcycle with your own hands, you additionally need to prepare:

• a piece of corrugated metal, about 4 mm thick;
• corners 35 mm;
• welding machine.

Healthy! Of course, expensive equipment is difficult to obtain, so if desired, you can fasten the entire structure with ordinary bolts.

After this you can start working.

Making a stand

First you need to prepare the foundation of the future structure. To do this, you need to install the corners so that they form a rectangle and weld them. After that:

• We install 4 30 mm tubes in the corners and weld them to the base. It is important to ensure that all elements are installed parallel to each other.
• We install smaller tubes (25 mm) into the resulting glasses. They can be pre-lubricated to make them rise and fall easier.
• We measure the height of all the “legs of the stool”. If they differ, then the finished structure will constantly stop.
• Preparing the upper platform. To do this, we adjust the corrugated sheet of metal to the required size and weld it to the ends of the pipes installed in the glasses.
• To add strength, we weld square pipes, angles or channels onto the longitudinal parts of the platform.
• We prime and paint the finished structure.

Additionally, you can weld on guide corners, which will be used as handles for carrying the structure.

After this, all that remains is to install the jack inside the motocross stand and enjoy the homemade unit. The cost of such a design will be no more than 800 rubles, and the functionality is no different from the finished product.

Alternative options

If you have an unnecessary jack at hand, then you don’t have to worry about making a “stool”. To do this, we weld two channels to the jack on both sides of the lift and two more to them. After this, all that remains is to fix the guides and enjoy the finished design.

If the vehicle only needs to be transported or stored in a garage, then rolls can be made. These designs are footrests on wheels. They are installed either on the rear or front wheels. To make such a stand, you will also need a welding machine. You will also need to take measurements as shown in the picture.

The length of the product must correspond to the dimensions of the two-wheeled “horse”, so everything depends on its specific type and model.

Thus, you can save quite a large amount of money and repair your motorcycle without any problems.

A motorcycle is a whole philosophy and lifestyle for a large number of people. It represents to its owners freedom, the romance of the road, exciting and unforgettable travel. But for a bike to last for many years, it requires proper care and maintenance. First, you need to figure out what types they come in and how to make a motorcycle mount with your own hands.

Features of installing special mounts for transporting a motorcycle to a tow bar

The most optimal type of car for transporting motorcycle equipment is considered to be frame SUVs and pickups. The design feature of such machines is the high level of strength of the frame to which the platform is mounted.

If it is necessary to equip passenger vehicles, either the method of inserting a profile beam into the towbar square (50 by 50 mm) or changing the beam is used.

The first method is simpler and significantly saves time. Almost all models of transport platforms and mountings for vertical loading fit perfectly into the tow bar. All that remains is to fix the product, following a certain procedure.

Sometimes specialized fasteners have to be installed independently or to order. In this case, a welding machine is used during conversion. The main thing is to make high-quality seams so that the structure meets the proper level of strength.

It is convenient to transport motorcycles in several ways, the effectiveness of which is determined by the motorist independently. By adhering to strict transportation rules, each driver will be able to deliver motorcycle equipment safely to any destination.

Did you manage to solve your problem using the recommendations from the article?

Yes!

46.73%

No. More answers required. I'll ask in the comments now.

37.55%

Partially. There are still questions. I'll write in the comments now.

15.72%

Voted: 719

Types of motorcycle stands

Today, tackles have proven themselves to be very convenient devices for repairing and servicing a bike. Every motorcycle owner who has had to repair their equipment has thought about purchasing such a device. The tackle allows the owner of the iron horse to install it very steadily for repairs. The roller is very convenient when changing a wheel - it allows you to hang the motorcycle and thereby easily remove the wheel.

We can say that a homemade stand is a do-it-yourself motorcycle stand, only without a table. If there are wheels, the lift can easily be moved to a given location for repairs. The small dimensions of the device allow it to be used in places with limited space.

• rear - for servicing the rear of the motorcycle;
• front - for servicing the front of the motorcycle.

The front type lift comes with an adapter that allows you to hang the wheel for repairs. The adapter is selected for a specific bike model. This tool is suitable for repairing the front fork. A do-it-yourself car tray is ideal for storing cars in the winter. It has a simple design and does not require special knowledge to operate it.

The rear type tackle is a little more structurally complex. It features an L-shaped device with a handle. It is equipped with clamps whose task is to securely hold the wheel. The width of the clamps is selected for a specific wheel. Such tackles are mainly used by repair services, as they allow lifting weights of up to 300 kg. With the help of such a tackle, you can hang the motorcycle in such a way that the suspension is maximally unloaded. Thanks to this feature, it is quite easy to replace the chain.

Transporting a motorcycle in a car trailer

The principle of transportation in the back of a trailer is quite simple. Owners must follow a few guidelines and basic rules to safely move their two-wheelers.

Fastenings for fixing a motorcycle in a trailer

Among the fastening materials, brackets and supports should be highlighted. Such elements often have to be installed on your own.

The brackets are designed for reliable fixation of motorcycle wheels. The parts are mounted based on the dimensional data of the motorcycle. When equipping a trailer yourself, if it is not possible to use an iron profile, you can use wooden beams.

The second option is a lodgement. In specialized trailers, such parts are assembled. However, they can also be installed in a simple trailer. You will need a perforated profile, which must be securely attached to the base of the trailer.

Subtleties of securing a motorcycle in a trailer

There are several important securing steps to keep in mind before transport:

• Check the reliability of the brackets and other base elements on the carriage.
• Use straps to secure the fork, wheels and frame.
• Each time, check the functionality of the ratchets on the belts.
• If possible, equip the trailer with a protective cover.

Transportation rules

There are several rules for transporting two-wheeled vehicles:

1. Reliable motorcycle mount.
2. Compliance with lifting capacity standards for specialized equipment. Exceeding the set value is allowed within +10 kg.
3. Depending on weather conditions, the trailer must be equipped with an awning or other covering.
4. Trailers for transporting motorcycle equipment must be equipped with lights.

Selecting a Factory Lift

The first thing you should pay attention to when choosing a stand in a store is the manufacturer of the device. The manufacturer must certify its product and provide all quality guarantees for the device. Factory lifts undergo a series of safety and operational tests. Branded products must comply with GOST standards. Good expensive lifts are made from quality materials using modern technologies. Therefore, it is very important to choose the right model.

The motorcycle lift industry is evolving along with technological progress. New production technologies are emerging, new materials for manufacturing are being developed. Competition among manufacturers leads to the emergence of more functional and easier-to-use devices.

Branded tires are increasingly being used by professional riders around the world. The presence of a large number of additional accessories can significantly expand the capabilities of these devices and simplify their work. A modern lift can be operated by one person and allows you to lift a heavy rear end, securing it securely.

Types of devices

The most popular type is the platform lift. It is quite mobile and versatile - it allows you to service different types of motorcycles. Hydraulic ones are used mainly for servicing heavy touring motorcycles and massive choppers. This type of lift is installed under the motorcycle frame and lifts it using hydraulics. Thus, the motorcycle is left in a suspended state, which allows for comprehensive maintenance and repair of equipment. Tools of this type have many adjustments and settings, which allows them to be used for repairing motorcycles of any type.

Factory or homemade

When repairing and servicing a bike, it is advisable to use both types of tackles - front and rear types. Factory solutions will meet all safety requirements, will be more functional and will have additional accessories, but all this will be quite expensive. On the other hand, homemade options will be several times cheaper, but the safety and functionality of such products will be much lower.

Advantages of factory devices:

• factory tackles are used by professionals;
• they have ideal proportions and geometry;
• can be operated by one person;
• can be installed under the pendulum and slider;
• have many adjustments and settings.

Transportation of a motorcycle at a specially designated transportation site

Specialized equipment may only be used if certain rules are strictly followed. Each of the points will ensure the safety of not only the equipment itself, but also other road users.

Rules for securing a motorcycle on the site and the fastenings used

• The load capacity should not exceed the permissible value - 130 kg.
• The maximum dimensions of transported cargo behind the vehicle should not exceed 1 m to the rear and 40 cm to the sides.
• Niches for different wheel diameters can be either variable or stationary.
• For fixation, special hooks and knitting needles are used. If such elements are not available, then they are mounted only to the fastening belts.

DIY making

A branded factory tool is a good and convenient tool for motorcycle repair. But the prices for such devices are quite high. It will also be quite difficult to choose a stand for a specific motorcycle model. Many companies offer universal stools. But, as practice shows, a universal tackle does not always have functions for a specific motorcycle.

In this case, you can make a motorized scooter with your own hands using drawings found on the Internet. A homemade lift can be perfectly adjusted to the size of your bike. It is quite simple to make, but it requires a lot of time and great care, since it must have ideal geometry. Otherwise, working with it will be quite problematic.

There are two ways to lift a motorcycle by the rear wheel. In the first case, lifting is carried out using a bushing installed in the wheel axle. In this position it is convenient to work with the chain.

In the second option, threads are made on the bushings and they are attached to the pendulum. In this position it is convenient to change wheels. When making the central frame of the tackle, you will need the help of a welder. All corners must be perfectly measured and welded securely. After all, safety and convenience during work depend on the accuracy of measurements and the quality of welding.

In conclusion, I would like to say that if possible, it is better to purchase a good branded option. If you are limited on money, then it is quite easy to make a motorcycle lift with your own hands. Drawings can be easily found on the Internet. A high-quality tackle will be an indispensable assistant in the repair and maintenance of your favorite bike.

The motorcycle undercarriage is a rigid structure that simultaneously lifts and secures it. It is needed in cases of chain lubrication, engine repair, and brake system maintenance. There are front and rear scooters for motorcycles. Typically, these structures are equipped with wheels for convenience. By adjusting the frame to the bike, you can easily lift even the heaviest unit using a lever.

Summary table of prices

The mount firmly fixes the motorcycle wheel, which prevents unauthorized rolling or falling.